Ssh Config Editor Pro 1 11 5 Crack

Ssh Config Editor Pro 1 11 5 Crack

In this article, I will show you how to access a UniFi switch's CLI interface and configuration. As you know, UniFi Switches are controlled and configured through the UniFi Controller. When you SSH to the switch you only get a linux shell prompt rather than a command line interface.
Ssh Config Editor Pro 1 11 5 Crack Download
Ssh Config Editor Pro 1 11 5 Crack File
Ssh Config Editor Pro 1 11 5 Crack Free
SSH Config Editor is a handy tool for manage your OpenSSH ssh client configuration file. You can add or edit identity files, port forwardings (with handy graphical preview) and any other ssh config option. Add/change identity files by choosing them in file dialog; Add/edit port forwarding options with graphical help. From your favorite serial application (Windows, Linux or macos), just open a serial connection (or ssh to 192.168.2.1, Windows, Linux or macos) to the PlutoSDR. The username is root and the password is analog. This will be the default (based on the AD9363). MobaXterm is a complete toolbox for remote computing. The application is an enhanced terminal for Windows with an X11 server, a tabbed SSH client and several other network tools for remote computing (VNC, RDP, telnet, rlogin). MobaXterm has the essential Unix commands for Windows desktop, in a single portable exe file. Key Features Include.
CheckBook pro Mac cracked version, easily and simply manage your personal checking accounts. A paper check register can't categorize your transactions or report cash flow over time, and it'll never balance itself. That's where we come in. Introducing CheckBook 2, the.
Here is how to connect to the UniFi switch CLISSH to the switch & login.
The credentials can be found in your UniFi controller's settings.
At the # prompt, telnet to 127.0.0.1
At the (UBNT) > prompt type 'enable'
Type 'show run' to output the running configuration of the switch

Ssh Config Editor Pro 1 11 5 Crack DownloadOnce you have reached the (UBNT) # prompt you are effectively configuring an EdgeSwitch, here is the EdgeSwitch CLI command reference.

Ssh Config Editor Pro 1 11 5 Crack DownloadOnce you have reached the (UBNT) # prompt you are effectively configuring an EdgeSwitch, here is the EdgeSwitch CLI command reference.
If you want to backup the configuration file you can use one of the following commands.
To make changes to the switch configuration use the configure command to enter config mode. Here is an example of how to change the description for interface 0/1
Ssh Config Editor Pro 1 11 5 Crack FileNote: Configuration changes you make to the switch via the CLI will be overwritten by the UniFi controller when the switch is restarted.
Ssh Config Editor Pro 1 11 5 Crack FreeAssign a local login (operator) and enable (manager) password.
At a minimum, HP recommends that you always assign at least a manager password to the switch. Otherwise, under some circumstances, anyone with Telnet, web, or serial port access could modify the switch configuration.
To configure local passwords:You can configure both the operator and manager password with one command.
Syntax:Configuring local passwords
Generate the switch public and private key pair.
A public and private host key pair must be generated on the switch. The switch uses this key pair along with a dynamically generated session key pair to negotiate an encryption method and session with an SSH client trying to connect to the switch.
The host key pair is stored in the switch flash memory, and only the public key in this pair is readable. The public key should be added to a 'known hosts' file (for example, $HOME/.ssh/known_hosts on UNIX systems) on the SSH clients which should have access to the switch. Some SSH client applications automatically add the switch public key to a 'known hosts' file. Other SSH applications require you to manually create a known hosts file and place the switch public key in the file. See the documentation for your SSH client application for more details.
(The session key pair mentioned above is not visible on the switch. It is a temporary, internally generated pair used for a particular switch/client session, and then discarded.)
NOTE: When generating a host key pair on the switch, the switch places the key pair in flash memory and not in the running-config file. Also, the switch maintains the key pair across reboots, including power cycles. Consider this key pair to be 'permanent' and avoid re-generating the key pair without a compelling reason. Otherwise, you must re-introduce the switch public key on all management stations you have set up for SSH access to the switch using the earlier pair.
Removing (zeroing) the switch public/private key pair renders the switch unable to engage in SSH operation and automatically disables IP SSH on the switch. To verify whether SSH is enabled, execute show ip ssh. However, any active SSH sessions will continue to run, unless explicitly terminated with the CLI kill command.
To generate or erase the switch public/private host key pair:
Because the host key pair is stored in flash instead of the running-config file, it is not necessary to use write memory to save the key pair. Erasing the key pair automatically disables SSH.
Syntax:crypto key generate |[ssh][dsa|rsa]bits >
Installs authentication files for ssh or https server, or for autorun.
 Install RSA key for autorun. See 'Configuring Autorun on the Switch' in the Management and Configuration Guide for more information.
Install RSA key for https certificate.
Use your SSL enabled browser to access the switch using the switch IP address or DNS name (if allowed by your browser). See the documentation provided with the browser application for more information.
Install host key for ssh server. Specify the key type as DSA or RSA.
Specify the key size (in bits).
zeroize 
Erases the switch public/private key pair and disables SSH operation.
Displays switch public key. Displays the version 1 and version 2 views of the key.
See SSH client public-key authentication for information about public keys saved in a configuration file.
Displays hashes of the switch public key in phonetic format, see 'Displaying the Public Key:'.
Displays fingerprints of the switch public key in hexadecimal format, see 'Displaying the Public Key:'.
Example:To generate and display a new key:
Example of generating a public/private host key pair for the switch
To compare the switch key to the key stored in your client's known-hosts file, note that the formatting and comments need not match.
NOTE: 'Zeroizing' the switch key automatically disables SSH (sets ip ssh to no). Thus, if you zeroize the key and then generate a new key, you must also re-enable SSH with the ip ssh command before the switch can resume SSH operation.
Configuring key lengths:The crypto key generate ssh command allows you to specify the type and length of the generated host key. The size of the host key is platform-dependent as different switches have different amounts of processing power. The size is represented by the <keysize> parameter and has the values shown in . The default value is used if keysize is not specified.
RSA/DSA values for various HP networking switches
PlatformMaximum RSA Key Size (in bits)DSA Key Size (in bits)
5400/3500/6200/8200/29001024, 2048, 3072
Default: 2048
1024
4200/2900/2810/2610/25101024, 2048
Default: 2048
1024
5300/2800/3400/2600896512
Provide the switch public key to clients.
When an SSH client contacts the switch for the first time, the client will challenge the connection unless you have already copied the key into the client's 'known host' file. Copying the switch key in this way reduces the chance that an unauthorized device can pose as the switch to learn your access passwords. The most secure way to acquire the switch public key for distribution to clients is to use a direct, serial connection between the switch and a management device (laptop, PC, or UNIX workstation), as described below.
The public key generated by the switch consists of three parts, separated by one blank space each:
A public key generated by the switch
With a direct serial connection from a management station to the switch:
Use a terminal application such as HyperTerminal to display the switch public key with the show crypto host public-key command, see Example of generating a public/private host key pair for the switch.
Bring up the SSH client's 'known host' file in a text editor such as Notepad as straight ASCII text, and copy the switch public key into the file.
Ensure that there are no changes or breaks in the text string. A public key must be an unbroken ASCII string. Line breaks are not allowed (changes in the line breaks will corrupt the Key.) For example, if you are using Windows® Notepad, ensure that Word Wrap (in the Edit menu) is disabled, and that the key text appears on a single line.
Example of a correctly formatted public key
Add any data required by your SSH client application. For example, before saving the key to an SSH client's 'known hosts' file you may have to insert the switch IP address:
Example of a switch public key edited to include the switch's IP address
For more on this topic, see the documentation provided with your SSH client application.
Displaying the Public Key:The switch provides three options for displaying its public key. This is helpful if you need to visually verify that the public key the switch is using for authenticating itself to a client matches the copy of this key in the client's 'known hosts' file:
Non-encoded ASCII numeric string:
Requires a client ability to display the keys in the 'known hosts' file in the ASCII format. This method is tedious and error-prone due to the length of the keys. See Example of a correctly formatted public key.
Phonetic hash:
Outputs the key as a relatively short series of alphabetic character groups. Requires a client ability to convert the key to this format.
Hexadecimal hash:
Outputs the key as a relatively short series of hexadecimal numbers. Requires a parallel client ability.
For example, on the switch, generate the phonetic and hexadecimal versions of the switch public key as follows:
Visual phonetic and hexadecimal conversions of the switch public key
The two commands shown in Visual phonetic and hexadecimal conversions of the switch public key convert the displayed format of the switch (host) public key for easier visual comparison of the switch public key to a copy of the key in a client's 'known host' file. The switch has only one RSA host key. The 'babble' and 'fingerprint' options produce two hashes for the key--one that corresponds to the challenge hash you will see if connecting with a v1 client, and the other corresponding to the hash you will see if connecting with a v2 client. These hashes do not correspond to different keys, but differ only because of the way v1 and v2 clients compute the hash of the same RSA key. The switch always uses an ASCII version of its public key, without babble or fingerprint conversion, for file storage and default display format.
Enable SSH on the switch and anticipate SSH client contact behavior.
The ip ssh command enables or disables SSH on the switch, and modifies parameters the switch uses for transactions with clients. After you enable SSH, the switch can authenticate itself to SSH clients.
NOTE: Before enabling SSH on the switch you must generate the switch public/private key pair. If not yet done, see Generate the switch public and private key pair.
When configured for SSH, the switch uses its host public key to authenticate itself to SSH clients.For SSH clients to authenticate themselves to the switch, configure SSH on the switch for client public-key authentication at the login (operator) level. To enhance security also configure local, TACACS+, or RADIUS authentication at the enable (manager) level.
See Step 5.
SSH client contact behavior:At the first contact between the switch and an SSH client, if the switch public key has not been copied into the client, then the client's first connection to the switch will question the connection and, for security reasons, provide the option of accepting or refusing. If it is safe to assume that an unauthorized device is not using the switch IP address in an attempt to gain access to the client's data or network, the connection can be accepted. (As a more secure alternative, the client can be directly connected to the switch serial port to download the switch public key into the client.)
NOTE:When an SSH client connects to the switch for the first time, it is possible for a 'man-in-the-middle' attack; that is, for an unauthorized device to pose undetected as the switch, and learn the usernames and passwords controlling access to the switch. This possibility can be removed by directly connecting the management station to the switch serial port, using a show command to display the switch public key, and copying the key from the display into a file. This requires a knowledge of where the client stores public keys, plus the knowledge of what key editing and file format might be required by the client application. However, if the first contact attempt between a client and the switch does not pose a security problem, this is unnecessary.
Enabling SSH on the switch:Generate a public/private key pair if you have not already done so. See Generate the switch public and private key pair.
Execute the ip ssh command.
Disabling SSH on the switch:Perform either of the following:
Execute no ip ssh.
Zeroize the switch existing key pair, see 'To generate or erase the switch public/private host key pair:' for more details.
Syntax:Enables or disables SSH on the switch.
[cipher|]
Specify a cipher type to use for connection. Alfred 4 powerpack v4 0 9 (1143).
Valid types are:
aes128-cbc
3des-cbc
aes192-cbc
aes256-cbc
aes128-ctr
aes192-ctr
aes256-ctr
Default: All cipher types are available.
Use the no form of the command to disable a cipher type.
Enable/disable secure file transfer capability. SCP and SFTP secure file transfer will not function unless SSH is also enabled.
[ip-version <4|6|4or6>]
Select the IP mode to run in. The mode 'ip-version 4' only accepts connections from IPv4 clients. The mode 'ip-version 6' only accepts connections from IPv6 clients. The mode 'ip-version 4or6' accepts connections from both IPv4 and IPv6 clients.
Default: ip-version 4 or 6
Allows configuration of the set of MACs that can be selected. Valid types are:
hmac-md5
hmac-sha1
hmac-sha1-96
hmac-md5-96
Default: All MAC types are available.
Use the no form of the command to disable a MAC type.
The TCP port number for SSH connections.
Default: 22.
Sets the maximum length of time (in seconds) allowed for initial protocol negotiation and authentication.
Default: 120 seconds
NOTE:HP recommends using the default TCP port number (22). However, you can use ip ssh port to specify any TCP port for SSH connections except those reserved for other purposes. Examples of reserved port numbers reserved IP ports are 23 (Telnet) and 80 (http). Some other reserved TCP ports on the switch are 49, 80, 1506, and 1513.
Enabling IP SSH and displaying the SSH configuration
CAUTION:Protect your private key file from access by anyone other than yourself. If someone can access your private key file, they can penetrate SSH security on the switch by appearing to be you.
SSH does not protect the switch from unauthorized access via the WebAgent, Telnet, SNMP, or the serial port. While WebAgent and Telnet access can be restricted by the use of passwords local to the switch, if you are unsure of the security this provides, you may want to disable web-based and/or Telnet access (no web-management and no Telnet). If you need to increase SNMP security, use SNMP version 3 only. To increase the security of your web interface see the section on SSL.
For an additional security measure, see the authorized IP managers feature in the Management and Configuration Guide for your switch. To protect against unauthorized access to the serial port (and the Clear button, which removes local password protection), keep physical access to the switch restricted to authorized personnel.
Configure the switch for SSH authentication.
Note that all methods in this section result in authentication of the switch public key by an SSH client. However only Option B below results in the switch also authenticating the client's public key. Also, for a more detailed discussion of the topics in this section, see SSH client public-key authentication notes.
NOTE:HP recommends that you always assign a manager-level (enable) password to the switch. Without this level of protection, any user with Telnet, web, or serial port access to the switch can change the switch configuration. If you configure only an operator password, entering the operator password through telnet, web, ssh or serial port access enables full manager privileges. See Assign a local login (operator) and enable (manager) password.
Option A: Configuring SSH access for password-only SSH authentication:When configured with this option, the switch uses its public key to authenticate itself to a client, but uses only passwords for client authentication.
Syntax:aaa authentication ssh login ][]
Configures a password method for the primary and secondary login (operator) access. If you do not specify an optional secondary method, it defaults to none. If the primary method is local, the secondary method must be none.
aaa authentication ssh enable []
Configures a password method for the primary and secondary enable (manager) access. If you do not specify an optional secondary method, it defaults to none. If the primary method is local, the secondary method must be none.
Option B: Configuring the switch for client Public-Key SSH authenticationIf configured with this option, the switch uses its public key to authenticate itself to a client, but the client must also provide a client public key for the switch to authenticate. This option requires the additional step of copying a client public-key file from a TFTP or SFTP server into the switch. This means that before you can use this option, you must:
Create a key pair on an SSH client.
Copy the client's public key into a public-key file (which can contain up to 10 client public keys.)
Copy the public-key file into a TFTP or SFTP server accessible to the switch and download the file to the switch.
For more on these topics, see SSH client public-key authentication notes.
With steps a-c complete and SSH properly configured on the switch, if an SSH client contacts the switch, login authentication automatically occurs first, using the switch and client public keys. After the client gains login access, the switch controls client access to the manager level by requiring the passwords configured earlier by the aaa authentication ssh enable command.
Syntax:Copies a public-key file into the switch.
Configures the switch to authenticate a client public key at the login level with an optional secondary password method.
Default: none
Syntax:aaa authentication ssh enable  
Configures a password method for the primary and secondary enable (manager) access. If you do not specify an optional secondary method, it defaults to none.
If the primary access method is local, you can only specify none for a secondary access method.
NOTE: The configuration of SSH clients' public keys is stored in flash memory on the switch. You also can save SSH client public-key configurations to a configuration file by entering the following commands:
include-credentials
write memory

For more information about saving security credentials to a configuration file, see Saving security credentials in a config file.
Example:Assume you have a client public-key file named Client-Keys.pub (on a TFTP server at 10.33.18.117) ready for downloading to the switch. For SSH access to the switch allow only clients having a private key that matches a public key found in Client-Keys.pub. For manager-level (enable) access for successful SSH clients use TACACS+ for primary password authentication and local for secondary password authentication, with a manager username of '1eader' and a password of 'm0ns00n'. To set up this operation, configure the switch in a manner similar to the following:
Configuring for SSH access requiring a client public-key match and manager passwords
SSH configuration and client public-key listing from figure shows how to check the results of the above commands.
SSH configuration and client public-key listing from figure
Use an SSH client to access the switch.
Test the SSH configuration on the switch to ensure that you have the level of SSH operation needed for the switch. If you have problems, see 'RADIUS-related problems' in the Management and Configuration Guide for your switch.